Drawings: Relief Valves

Size	Model Code	Control Type	3D Silhouette	2D Top View	2D Side View
08	PCFC	Fixed	08-Fixed5.stp	08-Fixed5-T.dxf	08-Fixed5-S.dxf
	PCFC RVBD RVDA RVPD RVPS	Screw	08-Screw1.stp	08-Screw1-T.dxf	08-Screw1-S.dxf
		Capped	08-Cap1.stp	08-Cap1-T.dxf	08-Cap1-S.dxf
		Knob (Hand)	08-Knob2.stp	08-Knob2-T.dxf	08-Knob2-S.dxf
		Tamperproof	08-Tamper1.stp	08-Tamper1-T.dxf	08-Tamper1-S.dxf
10	ESRV	Please refer to drawings located under Solenoid Valves.
	PCFC	Fixed	10-Fixed3.stp	10-Fixed3-T.dxf	10-Fixed3-S.dxf
		Screw	10-Screw2.stp	10-Screw2-T.dxf	10-Screw2-S.dxf
		Capped	10-Cap2.stp	10-Cap2-T.dxf	10-Cap2-S.dxf
		Knob (Hand)	10-Knob3.stp	10-Knob3-T.dxf	10-Knob3-S.dxf
		Tamperproof	10-Tamper2.stp	10-Tamper2-T.dxf	10-Tamper2-S.dxf
	RVBD RVBS RVDA RVDI RVPD RVPP RVPS	Screw	10-Screw1.stp	10-Screw1-T.dxf	10-Screw1-S.dxf
		Capped	10-Cap1.stp	10-Cap1-T.dxf	10-Cap1-S.dxf
		Knob (Hand)	10-Knob2.stp	10-Knob2-T.dxf	10-Knob2-S.dxf
		Tamperproof	10-Tamper1.stp	10-Tamper1-T.dxf	10-Tamper1-S.dxf
	PUVA	Screw	10-Screw5.stp	10-Screw5-T.dxf	10-Screw5-S.dxf
		Capped	10-Cap5.stp	10-Cap5-T.dxf	10-Cap5-S.dxf
		Knob (Hand)	10-Knob7.stp	10-Knob7-T.dxf	10-Knob7-S.dxf
		Tamperproof	10-Tamper5.stp	10-Tamper5-T.dxf	10-Tamper5-S.dxf
12	PCFC	Fixed	12-Fixed3.stp	12-Fixed3-T.dxf	12-Fixed3-S.dxf
		Screw	12-Screw1.stp	12-Screw1-T.dxf	12-Screw1-S.dxf
		Capped	12-Cap1.stp	12-Cap1-T.dxf	12-Cap1-S.dxf
		Knob (Hand)	12-Knob1.stp	12-Knob1-T.dxf	12-Knob1-S.dxf
		Tamperproof	12-Tamper1.stp	12-Tamper1-T.dxf	12-Tamper1-S.dxf
	RVBD	Screw	12-Screw2.stp	12-Screw2-T.dxf	12-Screw2-S.dxf
		Capped	12-Cap2.stp	12-Cap2-T.dxf	12-Cap2-S.dxf
		Knob (Hand)	12-Knob2.stp	12-Knob2-T.dxf	12-Knob2-S.dxf
		Tamperproof	12-Tamper2.stp	12-Tamper2-T.dxf	12-Tamper2-S.dxf
	RVPP RVPS	Screw	12-Screw4.stp	12-Screw4-T.dxf	12-Screw4-S.dxf
		Capped	12-Cap4.stp	12-Cap4-T.dxf	12-Cap4-S.dxf
		Knob (Hand)	12-Knob4.stp	12-Knob4-T.dxf	12-Knob4-S.dxf
		Tamperproof	12-Tamper4.stp	12-Tamper4-T.dxf	12-Tamper4-S.dxf

Note: If you have problems downloading the above drawings, Right Mouse Click on top of the file name, and select Save Target As. After saving the file, confirm the file name ends with the STP or DXF extension. If it does not, Right Mouse Click on top of the file name, select Rename, and make any necessary changes.

- Return to Drawings -